012

QNAP NAS HDD 교체.

 

TS-251A 2T 2G를 사서 사용하다가

www.qnap.com/ko-kr/product/ts-251a/specs/hardware

2G 메모리 업그래이드 해서 4G로

2T 디스크 업그래이드 해서 4T로 사용하던 중에 

 

큐텐에서 8T를 구매하여 장착하게 됐다.

(이거사느라 한달은 눈팅한듯..)

https://globalshop.qoo10.com/su/423374398/Q167909666

 

이것저것 시행착오를 하다가 다음에 헷갈리지 않기 위해 

정리해본다.

 

1. 나스 전원을 끈다.

2. 하드를 교체한다. (나스청소는 덤) 

 - 나중에 알았지만, 전원을 끄지 않고 교체가 가능하다. (더 깔끔하다.)

3. 나스 전원을 켠다.

4. 교체한 하드를 점검한다.

5. 나스가 부팅되면 교체된 하드로 생성된 볼륨을 삭제한다.

6. 스토리지풀을 생성한다.

7. 8T를 2T씩 쪼개서 3개의 씩볼륨을 생성한다.

8. FileStation 에서 공유폴더를 만든다.

 

* 처음 보는 볼륨 개념이 이해되지 않아서 씩볼륨으로 진행했다.

 - 정적볼륨 : 물리하드 통째로 쓴다.(통하드 개념)

 - 씩 볼륨 : 영역을 정해놓고 쓴다.(파티션분할 개념)

 - 씬 볼류 : 영역을 가변으로 구분하고 쓴다.(폴더? ㅋㅋ)

 

* 처음에는 하드를 교체할때 전원을 끄고 하드교체 후 전원을 키는 작업으로 번거롭게 하다보니

 교체한 하드의 스토리지, 볼륨이 깨지는 문제가 반복됐다.

 나중에 알게되고 나서는 전원이 켜진 상태에서 하드교체를 하는 방법으로 진행하게 되었다. 

 

* 백업할때 Qsync 영역을 빼먹는줄 알고 식겁했다. 다행히 날리기 전에 폴더에 옮겨서 백업했다.

  (동생 자료를 날려먹을뻔.)

 

* 백업하고 빈하드에 QTS라는 나스OS(?)를 새로 설치했다. (일종에 윈도우 밀기?)

  신기한것은 2번 하드에 최신OS를 설치하고 백업한 3번하드를 장착하니 기존 OS가 떴다.

  OS를 설치하면 윈도우처럼 마스터 디스크에 설치되는것이 아닌것 같다.

 

* HDD구성

 - 1번하드 : (시게이트 2T) 나스 구매시 장착된 초기 OS 설치하드

 - 2번하드 : (WD 2T) 중고로 구매한 추가하드

 - 3번하드 : (시게이트 8T) 구가 구매한 최신하드

 

1. 초기단계 : HDD1(초기OS,자료), HDD2(자료)

2. HDD1 백업준비 : 하드교체(HDD2 > HDD3)

 - 디스크검사 (8T 15시간 걸렸다)

3. HDD1 백업 : HDD1(초기OS,자료), HDD3(새하드)

 - HDD1 자료 HDD3로 이동 (이동자료 삭제하여 공간확보)

4. HDD2 백업 준비 : 하드교체(HDD3 > HDD2)

 - HDD2자료 HDD1로 이동 (꽉차서 2번 작업) : HDD2 자료를 HDD3으로 모두 이동하여 공간확보

5. QNAP OS 재설치 준비 : HDD1, HDD3번 탈착, HDD2번만 장착

 - 재설치 시 HDD까지 포멧된다. (재설치 후 HDD3을 장착하니 기존 OS로 부팅된다. @,@)

 > HDD2에 OS 설치작업을 다시 진행한 뒤 전원 상태에서 하드를 추가한것으로 기억

 

* 하드 슬롯이 2개인 모델이라 HDD2, HDD3만 장착하고 사용한다.

 - HDD2(WD)에 OS를 설치하고 디스크를 검사하니 베드섹터가 하나 나왔다. 중고라 그런가.. 싶지만, 왠지 찜찜

'nas' 카테고리의 다른 글

QNAP 렌섬웨어 복구후 파일정리  (4) 2021.10.30
QNAP NAS 렌섬웨어 파일 복구  (0) 2021.10.07

전체화면에서 독을 펼칠수 있단다.

macnews.tistory.com/646

 

[간단한 팁] OS X의 전체 화면 모드를 사용할 때 닥(Dock)을 보다 편하게 열어보는 방법

런치패드(Launch)와 함께 iOS의 기능이 OS X으로 도입된 Back to the Mac의 사례를 꼽으라면 전체 화면(Full Screen) 모드를 빼놓을 수 없습니다. 전체 화면 모드를 발동하면 OS X 메뉴바와 닥(Dock)이 화면에서

macnews.tistory.com

터미널에서

defaults write com.apple.dock autohide-fullscreen-delayed -bool FALSE;killall Dock

 > 전체 화면 모드로 실행 중인 상태에서 화면 최하단으로 마우스 커서를 옮기면 독이 올라온다.

 

defaults delete com.apple.dock autohide-fullscreen-delayed;killall Dock

 > 기본설정으로 복구

 

 

 

회사 업무용으로 Bitnami Redmine을 설치하면서 히스토리를 정리하는 글.

* 확인 - 플러그인 몇가지 설치 성공, subversion 저장소 사용 포기


 - 레드마인은 bitnami-redmine-3.3.2-0-windows-installer.exe을 설치한다.


Bitnami redmine 다운로드 :  https://bitnami.com/stack/redmine

 > 그새 며칠 지났다고 또 패치버전이 나왔네...  (bitnami-redmine-3.3.2-2-windows-installer.exe - 2017.03.05 현재)

 > 중간 부분을 찾아보면 agile 통합버전도 있지만 그건 플러그인 추가로 적용이 가능하니까 기본버전으로 설치. 
    난 플러그인을 14개나 추가할 거니깐.. ㅎㅎㅎ



redmine 설치

 - 주의 : 설치과정에서 Admin 계정정보 입력 시 가능한 영문으로 작성할 것.

   (이름을 한글로 설치했다가 서비스가 뜨지 않는 오류 발생)




플러그인을 설치하자.


redmineup 이라는 곳에서 제공하는 멋진 플러그인들이 있다.

 light 버전으로 무료 플러그인을 제공하고, 상용버전으로 확장된 기능을 서비스 한다. 

 - 여기에서 제공하는 agile 기능이 위에서 언급한 redmine agile 통합버전으로 제공되는 플러그인이다.



플러그인 설치 절차에 대해 상당히 많은 삽질이 소요됐다.

그러다가 redmineup에서 안내하는 설치 절차대로 진행하니 성공할수 있었다. 



설치한 플러그인 


redmine_agile-1_4_2-light.zip

redmine_favorite_projects-2_0_3-light.zip

redmine_people-1_2_0-light.zip

redmine_questions-0_0_7-light.zip




alexmonteiro-Redmine-Monitoring-Controlling-v0.1.1-54-g3b2d055.zip

 > redmine_monitoring_controlling

clipboard_image_paste-master.zip

 > clipboard_image_paste

redmine_code_review-0.7.0.zip

 > redmine_code_review

redmine_crm-4_0_6-light.zip

 > redmine_contacts

redmine_issues_tree-master.zip

 > redmine_issues_tree

redmine_spent_time-master.zip

 > redmine_spent_time

redmine_xlsx_format_issue_exporter-master.zip

 > redmine_xlsx_format_issue_exporter

redmine-progressive-projects-list-latest.zip

 > progressive_projects_list


플러그인 설치를 위해 작업한 스크립트는 아래와 같다. 


  1. redmine 설치가 완료된 후 필요한 플러그인을 다운로드 받는다.
  2. use_redmine.bat를 실행하여 redmine 명령창을 연다
    D:\88_Svr\Bitnami\redmine-3.3.2-0\use_redmine.bat
    
  3. ruby의 path를 등록한다.
    set path=%path%;D:\88_Svr\Bitnami\redmine-3.3.2-0\ruby\bin
    
  4. htdocs 폴더로 이동
    D:\88_Svr\Bitnami\redmine-3.3.2-0>cd apps\redmine\htdocs
    
    D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>
    
  5. 다운로드 받은 압축파일을 풀어서 (또는, git으로 받은 소스폴더) redmine plugins 폴더로 move 한다.
    D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs\plugins
    
  6. 이동한 플러그인을 설치한다.
    bundle install --without development test --no-deployment
    bundle exec rake redmine:plugins:migrate RAILS_ENV=production
    D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs\plugins>bundle install --no-deployment
    D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs\plugins>bundle exec rake redmine:plugins:migrate RAILS_ENV=production
    
    > D:\88_Svr\Bitnami\redmine-3.3.2-0\ruby\bin\bundle install --without development test --no-deployment
    > D:\88_Svr\Bitnami\redmine-3.3.2-0\ruby\bin\bundle exec rake redmine:plugins:migrate RAILS_ENV=production
    
  7. Mysql 데이터 백업 및 복구

    D:\88_Svr\Bitnami\redmine-3.3.2-0\mysql\bin\mysqldump.exe -u bitnami -p -P3336 bitnami_redmine > D:\77_Util\redmine\redmine-dpit\20170303_bitnami-redmine-3.3.2.0\2nd.backup-170303\backup_dpit_20170303.sql D:\88_Svr\Bitnami\redmine-3.3.2-0\mysql\bin\mysql.exe -u bitnami -p -P3336 bitnami_redmine < D:\77_Util\redmine\redmine-dpit\20170303_bitnami-redmine-3.3.2.0\2nd.backup-170303\backup_dpit_20170303.sql - 주의 : 공백 두개 입력시 오류 발생 (경로앞 주의)

[14종 플러그인 설치 이후 정상 실행 로그]

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle install --without development test --no-deployment
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Using rake 12.0.0
Using i18n 0.7.0
Using json 1.8.3
Using minitest 5.10.1
Using thread_safe 0.3.5
Using tzinfo 1.2.2
Using activesupport 4.2.7.1
Using builder 3.2.2
Using erubis 2.7.0
Using mini_portile2 2.1.0
Using nokogiri 1.7.0.1
Using rails-deprecated_sanitizer 1.0.3
Using rails-dom-testing 1.0.8
Using loofah 2.0.3
Using rails-html-sanitizer 1.0.3
Using actionview 4.2.7.1
Using rack 1.6.5
Using rack-test 0.6.3
Using actionpack 4.2.7.1
Using globalid 0.3.7
Using activejob 4.2.7.1
Using mime-types-data 3.2016.0521
Using mime-types 3.1
Using mail 2.6.4
Using actionmailer 4.2.7.1
Using actionpack-action_caching 1.1.1
Using actionpack-xml_parser 1.0.2
Using activemodel 4.2.7.1
Using arel 6.0.4
Using activerecord 4.2.7.1
Using public_suffix 2.0.5
Using addressable 2.5.0
Using coderay 1.1.1
Using concurrent-ruby 1.0.4
Using css_parser 1.4.7
Using daemons 1.2.4
Using eventmachine 1.0.3
Using tilt 2.0.6
Using haml 4.0.7
Using sexp_processor 4.8.0
Using ruby_parser 3.8.4
Using html2haml 2.1.0
Using thor 0.19.4
Using railties 4.2.7.1
Using haml-rails 0.9.0
Using htmlentities 4.3.1
Using jquery-rails 3.1.4
Using liquid 2.6.3
Using mimemagic 0.3.2
Using mysql2 0.4.2
Using net-ldap 0.12.1
Using protected_attributes 1.1.3
Using ruby-openid 2.3.0
Using rack-openid 1.4.2
Using bundler 1.9.6
Using sprockets 3.7.1
Using sprockets-rails 3.2.0
Using rails 4.2.7.1
Using rbpdf-font 1.19.0
Using rbpdf 1.19.0
Using redcarpet 3.3.4
Using redmine_crm 0.0.23
Using request_store 1.0.5
Using require_patch 0.1.0
Using rmagick 2.15.4
Using roadie 3.2.1
Using roadie-rails 1.1.1
Using ruby-ole 1.2.12
Using rubyzip 1.2.0
Using sass 3.4.23
Using spreadsheet 0.6.9
Using thin 1.6.1
Using tzinfo-data 1.2016.6
Using vcard 0.2.15
Using zip-zip 0.3
Using write_xlsx 0.83.0
Updating files in vendor/cache
Bundle complete! 50 Gemfile dependencies, 76 gems now installed.
Gems in the groups development and test were not installed.
Use `bundle show [gemname]` to see where a bundled gem is installed.

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle exec rake redmine:plugins:migrate RAILS_ENV=production
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
DL is deprecated, please use Fiddle
Migrating clipboard_image_paste (Clipboard image paste)...
Migrating progressive_projects_list (Progressive Projects List plugin)...
Migrating redmine_agile (Redmine Agile plugin (Light version))...
Migrating redmine_checklists (Redmine Checklists plugin (Light version))...
Migrating redmine_cms (Redmine CMS plugin)...
Migrating redmine_code_review (Redmine Code Review plugin)...
Migrating redmine_contacts (Redmine CRM plugin (Light version))...
Migrating redmine_favorite_projects (Redmine Favorite Projects plugin)...
Migrating redmine_issues_tree (Redmine Issues Tree plugin)...
Migrating redmine_monitoring_controlling (Redmine (Monitoring & Controlling | Monitoramento & Controle))...
Migrating redmine_people (Redmine People plugin (Light version))...
Migrating redmine_questions (Redmine Q&A plugin)...
Migrating redmine_spent_time (Redmine Spent Time plugin)...
Migrating redmine_xlsx_format_issue_exporter (Redmine XLSX format issue exporter)...

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>



오류 발생 사례

[플러그인 설치 중 발생하는 오류유형]

[오류1] - path 지정을 하지 않은경우 
D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs\plugins>bundle exec rake redmine:plugins NAME=redmine_graphs RAILS_ENV=production
'bundle'은(는) 내부 또는 외부 명령, 실행할 수 있는 프로그램, 또는
배치 파일이 아닙니다.

[오류2] - bundle exec 을 앞에 추가해야하는 경우 
D:\88_Svr\Bitnami\redmine-3.3.2-0>rake redmine:plugins:migrate RAILS_ENV=production
rake aborted!
No Rakefile found (looking for: rakefile, Rakefile, rakefile.rb, Rakefile.rb)

(See full trace by running task with --trace)

[오류3] - htdocs 폴더로 이동하지 않은 경우 
D:\88_Svr\Bitnami\redmine-3.3.2-0>bundle exec rake redmine:plugins:migrate RAILS_ENV=production
Could not locate Gemfile or .bundle/ directory

[오류4]
redmine-3.3.0-0 버전을 설치하면 subversion 저장소가 기본 설정되어 있으나,
플러그인 추가시 오류 발생

[오류5] - redmine_issues_from_excel-master.zip 플러그인 설치 오류 - rubyzip 버전 오류
D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle install --without development test --no-deployment
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
The source :rubygems is deprecated because HTTP requests are insecure.
Please change your source to 'https://rubygems.org' if possible, or 'http://rubygems.org' if not.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Fetching gem metadata from http://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching gem metadata from http://rubygems.org/...........
Fetching gem metadata from https://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching version metadata from https://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching dependency metadata from https://rubygems.org/..
You have requested:
  rubyzip < 1.0.0

The bundle currently has rubyzip locked at 1.2.0.
Try running `bundle update rubyzip`

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle update rubyzip
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
The source :rubygems is deprecated because HTTP requests are insecure.
Please change your source to 'https://rubygems.org' if possible, or 'http://rubygems.org' if not.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Fetching gem metadata from http://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching gem metadata from http://rubygems.org/...........
Fetching gem metadata from https://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching version metadata from https://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching dependency metadata from https://rubygems.org/..
Resolving dependencies......
Bundler could not find compatible versions for gem "rubyzip":
  In Gemfile:
    write_xlsx (>= 0) ruby depends on
      rubyzip (>= 1.0.0) ruby

    write_xlsx (>= 0) ruby depends on
      rubyzip (>= 1.0.0) x86-mingw32

    write_xlsx (>= 0) ruby depends on
      rubyzip (>= 1.0.0) ruby

    write_xlsx (>= 0) ruby depends on
      rubyzip (>= 1.0.0) x86-mingw32

    selenium-webdriver (~> 2.53.4) x86-mingw32 depends on
      rubyzip (~> 1.0) ruby

    selenium-webdriver (~> 2.53.4) x86-mingw32 depends on
      rubyzip (~> 1.0) x86-mingw32

    rubyzip (< 1.0.0) ruby

    rubyzip (< 1.0.0) x86-mingw32

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle exec rake redmine:plugins:migrate RAILS_ENV=production
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
The source :rubygems is deprecated because HTTP requests are insecure.
Please change your source to 'https://rubygems.org' if possible, or 'http://rubygems.org' if not.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Could not find gem 'roo (>= 0) x86-mingw32' in any of the gem sources listed in your Gemfile or installed on this machine.
Run `bundle install` to install missing gems.

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>bundle install --without development test --no-deployment
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
The source :rubygems is deprecated because HTTP requests are insecure.
Please change your source to 'https://rubygems.org' if possible, or 'http://rubygems.org' if not.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem vcard (~> 0.2.8) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Your Gemfile lists the gem redmine_crm (>= 0) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Warning: this Gemfile contains multiple primary sources. Using `source` more than once without a block is a security risk, and may result in installing unexpected gems. To resolve this warning, use a block to indicate which gems should come from the secondary source. To upgrade this warning to an error, run `bundle config disable_multisource true`.
Your Gemfile lists the gem simplecov (~> 0.9.1) more than once.
You should probably keep only one of them.
While it's not a problem now, it could cause errors if you change the version of just one of them later.
Fetching gem metadata from http://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching gem metadata from http://rubygems.org/...........
Fetching gem metadata from https://rubygems.org/...........
Fetching version metadata from http://rubygems.org/...
Fetching version metadata from https://rubygems.org/...
Fetching dependency metadata from http://rubygems.org/..
Fetching dependency metadata from https://rubygems.org/..
You have requested:
  rubyzip < 1.0.0

The bundle currently has rubyzip locked at 1.2.0.
Try running `bundle update rubyzip`

D:\88_Svr\Bitnami\redmine-3.3.2-0\apps\redmine\htdocs>



추가.


버전 문제로 막혔던 subversion 오류를 해결했다. 


https://www.visualsvn.com/server/download/


여기서 visualsvn server를 다운받아서 설치만 하면 된다. 

* 주의 (포트는 가급적 80 포트를 피하자)


아.. 끝.



# 추가 플러그인

http://www.redmine.org/plugins/mega_calendar

 - https://github.com/berti92/mega_calendar

 > local 파일이 없어서 en.yml 을 기준으로 ko.yml 파일을 만들어준다.

    (로컬 yml 파일 중 어떤것이 적용되는지 테스트결과가 명확하지 않아서 

     en.yml, ko.yml을 모두 한글로 작성하여 구동하니 한글로 잘 보임. - 발테스트)

 > 버그 : 상단에 추가된 메뉴의 엑션이 sub_path값이 지정되지 않아서 오류가 난다. 

    apps\redmine\htdocs\plugins\mega_calendar\init.rb 에 지정되 sub_path 값을 수정해준다.

    예 > 'sub_path' => '/', -> 'sub_path' => '/redmine/',

mega_calendar-master.zip


ko.yml



[오류6] - plugins 폴더에 복사 후 bundle install 을 하지 않은 경우 

Could not find gem 'vpim (= 13.11.11) x86-mingw32' in any of the gem sources lis

ted in your Gemfile or installed on this machine.

Run `bundle install` to install missing gems.



참고

http://egloos.zum.com/ilovethese/v/4246681

'install > redmine' 카테고리의 다른 글

레드마인 설치 후 포트변경  (1) 2023.08.31

+ Recent posts